OldMiniBikes.com

(2) 1/4" x 1/4" x 4" Keystock for Live Axles

(2) 1/4" x 1/4" x 4" Keystock for Live Axles

(2) 1/4" x 1/4" x 8" Keystock for Live Axles

(2) 1/4" x 1/4" x 8" Keystock for Live Axles

(2) 3/16" x 3/16" x 4" Keystock for 5/8" Jackshaft & Sprockets

(2) 3/16" x 3/16" x 4" Keystock for 5/8" Jackshafts Live Axles

(2) 3/16" x 3/16" x 8" Keystock for 5/8" Jackshaft & Sprockets

(2) 3/16" x 3/16" x 8" Keystock for 5/8" Jackshafts Live Axles

(5) Torque Converter Shims 3/4" for Predator 212cc 224cc Tecumseh Briggs

(5) Torque Converter Shims 3/4" for Predator 212cc 224cc Tecumseh Briggs

1" Coleman CT Mini Bike Triple Trees Set (upper & lower)

Replacement Triple Trees for Coleman CT Mini Bikes 10-1/4" Long x 1-1/2" Wide 9" Center to Center between Fork Tubes

1" stub Flange exhaust Header pipe muffler GX200 212cc 196cc predator 6.5hp

1" L x 1" OD stub Flange exhaust Header pipe muffler GX200 212cc 196cc predator 6.5hp.

1/2" x 3/4" Bronze Bushing Bearing

1/2" ID x 3/4" Long Bronze Bushing Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as...

1/4" x 1/4" x 4" Keystock for Live Axles

1/4" x 1/4" x 4" Keystock for Live Axles

1/4" x 1/4" x 8" Keystock for Live Axles

1/4" x 1/4" x 8" Keystock for Live Axles

3/16" x 3/16" x 4" Keystock for 5/8" Jackshaft & Sprockets

3/16" x 3/16" x 8" Keystock for Jackshafts Live Axles

3/16" x 3/16" x 8" Keystock for 5/8" Jackshaft & Sprockets

3/16" x 3/16" x 8" Keystock for Jackshafts Live Axles

3/4" NPT Male Threaded Exhaust Flange for Predator 212cc

3/4" NPT Male Threaded Exhaust Flange for Predator 212cc

4.10 x 3.50 - 6 Tire & Wheel Combo - Vintage Mini Bike Go Kart

4.10 x 3.50 - 6 Tire & Wheel Combo - Vintage Mini Bike Go Kart

5" x 5/8" Weld On Mini Bike Fork Neck w/ Bronze Bushings

5" x 5/8" Weld On Mini Bike Fork Neck w/ Bronze Bushings 5" Long x 1" OD DOM Tube recessed for bronze bushings.

5/8" Mini Bike Axle Hardware Kit

Includes two 5/8 fine thread nuts and washers.

5/8" x 3/4" Bronze Bushing Bearing

Commonly used on Mini Bike Fork Necks, Swing Arm Shafts and more.  Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface...

5/8" x 5/8" Bronze Bushing Bearing

Commonly used on Mini Bike Fork Necks, Swing Arm Shafts and more.  Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface...

60T 5" Drum Brake Sprocket - Vintage Mini Bike Bonanza BC MX Azusa spinner 8"

Reproduction 5" Brake Drum Sprocket 60 Teeth, #35 Chain. Fits Bonanza MX / AZUSA 8" Spinner Wheels Has some surface rust from shelf life.

7/8" Coleman CT Mini Bike Triple Trees Set (upper & lower)

Replacement Triple Trees for Coleman CT Mini Bikes 10-1/4" Long x 1-1/2" Wide 9" Center to Center between Fork Tubes

72T 5" Drum Brake Sprocket - Vintage Mini Bike Bonanza BC MX Azusa spinner 8"

Reproduction 5" Brake Drum Sprocket 72 Teeth, #35 Chain. Fits Bonanza MX / AZUSA 8" Spinner Wheels Has some surface rust from shelf life.

Black Torque Converter Engine Riser Plate + Hardware Kit

Powder Coated Black Torque Converter Riser Plate for Predator Engines, Honda Clones, etc. Includes the following: (1) Torque Converter Riser Plate (4) SAE Engine to Plate Bolts (4) SAE Nuts and Bolts...

Bonanza BC Mini Bike Front Forks / Rear Shock Springs

Bonanza BC Mini Bike Front Forks / Rear Shock Springs Sold as a pair (2 springs) 5-1/4" Long

Bonanza Chopper Foot Pegs

Bonanza Chopper Foot Pegs

Bonanza Chopper Forks (Lowers)

Fork Lowers for Bonanza Chopper Mini Bikes. 3 Hole Adjustable length. 

Bonanza Chopper Forks (Upper)

Reproduction Bonanza Mini Bike Chopper Forks This is for the upper forks only. Other reproduction parts available.   

Bonanza Chopper Forks Set

Reproduction Bonanza Chopper Forks. These forks are identical to the originals other than the Fork Lowers having welded 5/8" axle retainers versus being flattened steel. The material is polished...

Bonanza Chopper Rear Axle Mounts / Suspension

Bonanza Chopper Rear Axle Mounts / Suspension Reproduced from an original set. 

Bonanza Chopper Sissy Bar

Bonanza Chopper Triple Trees - 1"

Pair of 1" Triple Trees. Fits many others. Holes are 1" for the fork tubes 5" Center to Center between Forks

Bonanza Chopper Triple Trees - 7/8"

Pair of Triple Trees for Bonanza Chopper. Fits many others. Holes are 7/8" for the fork tubes 5" Center to Center between Forks

Bonanza Front Peg Mini Bike Jackshaft

Jackshaft for the front peg Bonanza mini bikes.  5/8" x 9-5/16" shaft with snap rings grooves and 2 snap rings included